How to Light Up LEGO Set 21369 The X-Files: The Truth in the Basement (Kyglaring Lighting Setup Guide)
Introduction
“The truth is out there.” For longtime fans of *The X-Files*, the LEGO 21369 set is more than just a building set—it’s a portal to Mulder’s underground office. But without the lights, the 21369’s iconic UFO is just a lump of black plastic, and the forest scene looks rather bland. We’ll show you how to transform this build into a glowing centerpiece using the Kyglaring Light Kit for LEGO 21369. We’ve focused on recreating two classic moments: the eerie floating light effect of the alien spacecraft and the warm sense of hope radiating from the “I Want to Believe” poster.
What You’ll Need
-
LEGO 21369 The X-Files (completed build)
-
— Choose between our (Plug & Play) or the Remote Control Version (5 Effects + Battery Backup).
-
USB Power Supply (5V/1A recommended, included in Touch version).
-
AAA Batteries (3x, for remote version, not included).
-
Kyglaring Instruction Manual & Video Guide (included).
Step 1: Test Before Installation (Don’t Skip This!)
Before embedding the light wires into the building blocks, be sure to test each LED. Plug the LEDs into the Multifunctional Effects Module (Bag 7) and check for any burnt-out LEDs. Trust me, if you don’t discover that the lights aren’t working until after you’ve finished assembling the UFO, that’s when you’ll really have a “paranormal incident.”
Step 2: Illuminate the UFO (The Classic Scene)
-
Action: Install the White Bit Lights along the bottom edge and tip points of the UFO.
-
The Effect: This recreates the classic movie shot of the alien craft hovering. Use the Multifunction Module to activate different modes. The breathing effect mimics a living engine, while the strobe effect captures the tension of an alien encounter.
-
Pro Tip: Route the main wire through the central column to hide it from view.
Step 3: Backlight the "I Want to Believe" Poster
-
Action: Place a Warm White Strip directly behind the poster on the lower wall.
-
The Effect: The warm yellow glow shines outward, highlighting the texture of the bricks. This creates that nostalgic, hopeful vibe of Mulder's dedication. We use warm white because cool white would feel clinical; this feels like a desk lamp in a dim room. If you like this aesthetic, check out our other
Step 4: The Forest & The Beam
-
Action: Use the Ice Blue Round Lights for the treetops and the Transparent Green DIY Strips for the forest floor glow. Connect them to the 5-Way Remote Module if you chose the remote version.
-
The Center Beam: The clear column in the middle gets a dedicated light path. This is the "abduction beam" — make sure it’s bright and centered. This ice blue and green combination is also popular in our for creating sci-fi atmosphere.
Step 5: Final Assembly & Power Options
-
Touch Version: Connect the USB cable for instant on/off and dimming.
-
Remote Version: Insert 3x AAA batteries for wireless control of all effects.
Effect comparison: before and after lighting up
Look at the contrast. With the lights off, it's a nice model. With the lights on, it's Mulder's world. The green trees pop, the UFO beams down, and that poster seems to whisper secrets. We also offer light kits for the Venator-class Republic Attack Cruiser (75367) and the Millennium Falcon (75105) if you want to expand your sci-fi display.
Why Choose the Kyglaring 21369 Light Assembly?
While generic light kits are available on the market, Kyglaring is custom-designed for the complex layered structure of the 21369 set:
1.Cinema-quality effects: It’s not just about lighting—it’s about creating atmosphere. The dynamic effects of the UFO (breathing/strobing) are unmatched by static lights.
2.Flexible dual power options: USB is ideal for long-term displays, while AAA batteries are perfect for trade shows and portability. Many competitors offer only a single power option.
3.No modifications required: The 2-pin plug fits directly into LEGO studs—no drilling, no glue, and no need to solder resistors yourself.
4.Slim wiring: Our cables can be perfectly hidden between the studs, preventing the bricks from bulging and ensuring a stable build.
FAQ
-
Q: Will the lights damage my LEGO?A: No, our LEDs are low heat and safe for long-term use. You can learn more about our safety standards on the .
-
Q: Can I control the UFO effects?A: Yes. The touch version has 4 built-in modes; the remote version also supports individual control of 5 lighting effects.
-
Q: Is this kit compatible with the GWP 40896 Scully's Lab?A:Of course. The 21369 light set pairs perfectly with the main set, and while the 40896 is a standalone mini-scene that doesn’t require a power source, it still creates a fantastic atmosphere when displayed side by side—players looking to complete their entire X-Files scene, don’t forget to place your order by August 10 to secure this free gift.